Thursday, January 8, 2015

Connecting Remote Islands

Connecting Remote Islands

Thousands of small, hard-to-reach islands are in need of affordable telecommunication services. These are islands with small population, no or unreliable electrical grid, huge infrastructure limitations and low levels of income.

Major Bottlenecks:

The major challenges by any service provider to reach these remote islands for mobile communication services are:
  • Limited size – 2,000 or less inhabitants
  • Low income group
  • Geographical dislocation
  • Proneness to natural hazards
  • No or unreliable grid electricity
  • Limited infrastructure

Omoco for Remote Islands:

OMOCO platform delivers affordable mobile connectivity to millions of such people living in these islands and connect them to the capital of the country (Mainland) and further to rest of the world.
OMOCO all-IP approach enables quick integration with satellite service providers offering backhaul connectivity to the service provider’s network in mainland. The advantages of connectivity to these remote islands and mobile communication at the hands of inhabitants are manifold.

Enterprise & In-building


Why Omoco as an Enterprise GSM and In-Building Telecom Solution?

Wireless users spend more than 80% of their time indoors – inside buildings – be it offices, corporate parks, shopping malls, residential townships etc. Existing in-building coverage solutions are costly to deploy and difficult to install. When coverage is provided via outdoor base stations, issues are observed related to user experiences. Large campuses may have many such high rise buildings spread across different geographical locations.

How Can Omoco Help?

Omoco enables owners of these buildings/organizations setting up quick and cost effective private mobile network. The box, when deployed, can also interface with cost effective enterprise PBX, VoIP operators/MNO to extend the communication to the outside world.
Single Omoco Box has sufficient RF power output to feed DAS for up to 8 floors of approx 10,000 sq ft each.
Also, Omoco is one telecom solution that enables connecting multiple locations using enterprise IP network, allowing a multi-location private mobile network and mobile office.

A Perfect Enterprise & In-Building Telecom Solution:

  • Unified platform for GSM services
  • Small and highly integrated - Easy to carry GSM network
  • Local voice offload
  • Interworking with existing enterprise / service provider infrastructure
  • Connect to multiple service providers (VoIP, PLMN)
  • Scalable architecture (Encompass multiple locations)
  • Multi-location enterprise network
  • Guaranteed coverage and capacity
  • Multiple backhaul connectivity options – radio, fiber and satellite for remote industries
  • Choice of handset
  • Superior coverage than DECT
  • Quick deployment
  • Managed by IT

Monday, January 5, 2015

The Low Cost GSM Network is Here

The Low Cost GSM Network is Here


This post takes a look at custom hardware that can be used with open source GSM network software to enable the creation of extremely low cost mobile network infrastructure.
In October it will be two years since I wrote about the opening up of GSM via open source implementations of key technology, development of which has continued since then with many new features being added to software and a growing number of real world installations. In addition to which there are now three custom hardware platforms that support the software.
Open source
In that post from 2010 I mention in brief two open source infrastructure projects,OpenBTS and OpenBSC. The former implements a GSM base station or “BTS” transceiver as a software-defined radio (SDR), along with all the other functionality required that when combined with the Asterisk IP telephony switch enables GSM handsets to be turned into SIP (Voice-over-IP) endpoints.
The OpenBSC project is equally as impressive and provides software that can be used as a traditional GSM switching centre (BSC) and integrated into an existing mobile network, or alternatively can be combined with BTS hardware and configured as a “GSM network in a box”.
The above is something of a simplification and does not do justice to the projects, and for further details see their websites or an introductory article that I wrote for The H.
Early hardware support
Initial hardware support for OpenBTS was provided via the Universal Software Radio Peripheral (USRP), a modular and highly flexible companion to the open source SDR platform, GNU Radio.
OpenBSC started life as a GSM infrastructure research project and has since developed into something that is finding use in commercial networks. Most development work to date has made use of surplus BTS hardware, and this was really the only option available to greenfield network deployments which, not surprisingly, has proved problematic.
Custom hardware
The first purpose built hardware for OpenBTS came from the project sponsors,Range Networks, who provide turnkey development hardware which at the time of writing is priced at $4,995. With more substantial hardware options that are aimed at commercial deployments and that are P.O.A.
title
Prototype UmTRX hardware (UmTRX Project, CC BY-SA 3.0)
A Russian company called Fairwaves have been working on an open source hardware platform for OpenBTS that is called UmTRX. With the schematics and BoM published under a Creative Commons licence and FPGA firmware and driver code published under the GPL. Pricing for the UmTRX has not been announced as yet, but given that it's described as being “budget-friendly” and USRP and Range Networks options for OpenBTS already exist, it's likely that this is going to be competitive.
title
The sysmoBTS (© systems for mobile communication Gmbh) 
In realising that the ongoing success of OpenBSC in commercial deployments depended upon securing the availability of affordable BTS hardware, German company sysmocom developed the sysmoBTS product. While this is not open source hardware, the BTS firmware is at the very least in part open source, and it's also possible to run OpenBSC on the same hardware in order to create a single box turnkey solution. Pricing for the sysmoBTS is available on application, but some have suggested the single unit price to be circa 2,000-2,500 Euro.
Conclusion
It's still reasonably early days but OpenBTS and OpenBSC seem to be following the typical open source technology adoption curve, where initial use is primarily in research, by enthusiasts and communities with limited budgets, and by a small but growing number of forward thinking companies that are keen to shrink their operating cost base.
The emergence of custom hardware will lend support to the development of OpenBTS and OpenBSC whilst also enabling more widespread adoption, and is almost certainly a sign of things to come. For most of its life GSM technology has been off-limits to open innovation, but this is rapidly changing and it may just be that the projects covered here have sown the seeds for the disruption of the mobile network equipment provider industry.

Saturday, January 3, 2015

Build Your Own Cellular Network

Build Your Own Cellular Network

just about anybody can create an inexpensive cellular base station that routes calls all over the world.

By Erica Naone on April 20, 2010




The task of running a cellular network has usually been reserved for major carriers. But now an open-source project called OpenBTS is proving that almost anyone can cheaply run a network with parts from a home-­supply or auto-supply store. Cell-phone users within such a network can place calls to each other and–if the network is connected to the Internet–to people anywhere in the world.

The project’s cofounder, David Burgess, hopes that OpenBTS will mean easier and cheaper access to cellular service in remote parts of the world, including hard-to-reach locations like oil rigs and poor areas without much infrastructure. OpenBTS has already been used for cellular service at the Burning Man festival in the Black Rock Desert of Nevada and on the island of Niue in the South Pacific, among other locations.

a. universal software radio peripheral
A relatively inexpensive piece of hardware, easily purchased online, can be tuned to provide various types of radio signals. Someone running an OpenBTS network would use it to send and receive radio transmissions between the base station and a user’s cell phone.

asterisk software
A typical GSM base station, Burgess says, can’t do anything without a suite of components that maintain databases, perform call-­switching functions, and so forth. This infrastructure is expensive (typically around $250,000) and complicated to configure, and it needs to be stored in an air-conditioned room. Obviously, that’s impractical in the kinds of places ­OpenBTS is designed for. As a result, the system replaces much of the physical infrastructure of the core network with VoIP software–in this case, an open-source program called Asterisk that can be installed on any off-the-shelf PC.

IP Connection
Cell-phone users on an OpenBTS network can reach each other even if the system isn’t connected to the Internet, but reaching someone outside the network requires an Internet connection. On Niue, the group used five-gigahertz IP radios to link the BTS unit to Telecom Niue’s wired Internet infrastructure, four kilometers away. Burgess says that response time can get a bit sluggish if the Internet connection isn’t very good, but it doesn’t take much bandwidth to make the system functional.

power supply
The system deployed on Niue draws about 60 watts of power, supplied by three marine batteries of the type that many locals use on their boats. Because the system’s power requirements are so low, Burgess says, a base station could also run on solar or wind power.

gsm handset
OpenBTS re-creates the technology behind GSM (the global system for mobile communications), which is used by the majority of mobile phones in the world. Any GSM phone will “see” an OpenBTS network as a standard cell network and interact with it normally.

antenna
Like any cell network, an OpenBTS system requires an antenna to facilitate signaling. Different types of antennas can be used, according to the range the operator wants the network to have.

Friday, January 2, 2015

Clarity Network Architechture



The Municipality of Zaanstad supports “The New Way of Working” with private GSM network and IP telephony


The Municipality of Zaanstad supports “The New Way of Working” with privateGSM network and IP telephony

Summary:--

Following an extensive public tender, the municipality of Zaanstad selected Dimension Data to
supply an innovative Private GSM network and Avaya IP telephony environment. These solutions were required because Zaanstad was having a new town hall constructed where almost all of its services were brought together, whereas previously employees were working at three different locations. Together with opting for a new town hall at one location, Zaanstad also chose
the New Way of Working. This new and flexible office concept enables the majority of staff
members to work independently of location, inside and outside the new building. Thanks to the
new and innovative Dimension Data telephony environment, they can be reached throughout
the entire building by their smartphone. And thanks to the Private GSM technology installed,
the reachability and cover in and around the new town hall are first rate. 

Business challenge:-

In view of establishing a new town hall, the Zaanstad municipality chose a telephony environment that supports the New Way of Working. The municipality introduced this concept in order to work both more effectively and more efficiently, and with the New Way of Working the majority
of staff do not have a fixed workspace.On arrival, employees themselves look for somewhere to work. Only Customer Contact Centre and secretarial staff have landlines at their disposal. When the new town hall went into operation, the rest of the staff could choose from various types of smartphones. 

Solution delivered:-

Dimension Data designed and built a private GSM network that has been fully integrated with an IP-telephony based IPcommunication platform. This integration makes broad Unified Communications functionality available on employees’ smartphones. For mobile communication outside the building, the municipality entered into a contract with Mobile Virtual Network Integrator Private Mobility, which connected the private GSM network to Vodafone’s public mobile network. This means that even outside the building, part of the employees are still available on their fixed phone number.
A component of the IP telephony solution is an Avaya Aura contact centre that handles all incoming calls to the central 14075 number. 14075 is the municipality’s
general number that citizens can use for any questions they have. Dimension
Data based the private GSM network on Quortus technology.

The result:-

The Zaanstad municipality boasts a telephony environment that provides reliable and flawless communication by means of an internal GSM network. Employees who are often working
outside the building – and who have to be available – are able to roam between the private GSM network and the public network without any problem. However, this is not the only major advantage of GSM. This approach ensures a robust environment, whereby fewer access points are needed than with a DECT or WiFi network. With a Private GSM environment, employees experience the benefits of proven GSM technology, yet they are not dependent on the public GSM network, over which the municipality has no control, and which can become overloaded.

The solution:-
• Delivery and implementation of the Private GSM and IP telecommunication infrastructure              (according to planning and within budget).
• Maintenance: 24x7 Uptime, so that Zaanstad’s provision of services is guaranteed at all                  times.

Value derived:-

• Employees work with a smartphone of their choice. Based on Choose Your Own
         Device, there is a choice from iOS (Apple iPhone) or Android (HTC or Samsung).
• Employees who also work outside the town hall and who must be available roam without any            problems between the private GSM network and the national mobile network.
• The private GSM network offers better coverage throughout the building with
         fewer access points than DECT or WiFi.
• Increased availability, since employees do not depend on public GSM networks and
        are thus at less risk of poor availability due, for instance, to the public network overloading.





Friday, December 12, 2014

Distributed architecture benefits


Distributed architecture benefits

Adopting a distributed architecture for IP connected radio systems offers network operators the following benefits:
Simplicity: A single intelligent base station that replaces a number of discreet system components significantly reduces the complexity of the system, making it easier to deploy and maintain.
Scalability: The protocols and hardware used in IP networks allow them to be scaled up to meet changes in system requirements. This is matched by a distributed radio system architecture that, due to its switchless design, is able to be ultimately scalable.
Resilience: Good system design, combined with the inherent reliability of IP and the right equipment, enables the deployment of robust and fault tolerant networks without the need to duplicate high cost hardware equipment.
Open standards: Use of IP connectivity means the same principles apply anywhere in the world and system architects are free to choose whatever vendor equipment they wish to create a distributed architecture radio system.
Security: By applying IP security at the boundaries of radio system sub-nets, implementing network security policies and maintaining control over remote access, the security of an IP based radio network can be equal to or possibly greater than those deployed using discreet telecommunications circuits.
Management: Use of a single protocol throughout the system architecture for both core process and radio system operation permits control data, voice traffic and statistical data to share the same network. One notable point being that IP networks allow rapid and reliable software updates meaning that new features can be introduced without service visits.
Cost: Global adoption of IP networks and the transition of central switching from a dedicated hardware unit to a software function have driven down the cost of deploying and maintaining a distributed architecture radio system.

Moving from switch-based architecture

Switch-based architecture is a logical concept that employs a central switching unit to manage the interconnections between two or more nodes. When applied to multi-site radio systems, a node is a radio site generally comprising a series of base stations with a site controller exchanging control data with a central switch. The site controller brings its base stations into calls as needed and, where inter-site calling is required, each base station has a dedicated landline for call audio. The central switch is then responsible for routing call audio to dispatching, telephone extensions or other sites.
There are several drawbacks to this architecture though. The central switch is vital so, if it stops working, then no inter-site calls can take place. Complex radio site equipment is required to interface base stations with the site controller and audio connections, but this series of discrete units is costly and setup requires a high degree of technical expertise. Furthermore, having a dedicated landline for each base station means providing a lot of resource on the off chance that it is needed.
Whatever the merits of dedicated telecommunications links were a decade ago, they have now been overtaken by advances in the design and availability of IP based networks. The result is IP backhaul networks which provide higher bandwidth and more resilience but at a lower cost.
Manufacturers moving away from the conventional switch- based system model can exploit the principles of distributed architecture and produce reliable radio systems that deliver greater benefits than digital radio alone.
Creating a true distributed architecture radio system involves more than simply linking sites with IP. To be able to take full advantage of its properties requires the use of generic and identical system components resulting in radio systems that are simpler and significantly more resilient than their switch based predecessors whilst at the same time holding down cost.
A genuinely distributed radio system has no central component(s) and therefore failure of any piece of equipment within the network will result in the overall system continuing to operate seamlessly. The emergence of IP backhaul has enabled this change in approach to happen and it is the perfect vehicle to provide secure and reliable inter-connections to radio sites in the emerging markets.